Automation and closed-loop control of test systems

The modern testing software

The imx OMEGA software platform is the base software for all imx test benches. It is a proprietary software of imx solutions, which is continuously enhanced.

Thanks to standardized basic software with a specified range of functions, the user interface of all imx test benches is the same. This minimizes the training required and enables all customers to benefit from the ongoing development of the base software.

imx OMEGA provides the general functions for managing the tests and the test parameters. This makes it easy to adapt test sequences to different test objects and test sequences. The software monitors the limits for protection of the DUT and controls the data storage of the recorded measurements and the calculated test results. It also includes a user administration, which controls the access authorization to the different areas and with which the user’s rights are regulated.

All imx test benches use imx OMEGA. Thanks to a modular software concept, it is possible to create new test types independently, to modify the sequence of existing test types or to adapt the closed-loop control and automation processes. We offer corresponding training courses for this purpose.

DUT management

Parameterization of tests

Limit monitoring

Visualization of measurement data

automated evaluation

Language German / English

With one click from starting a test
to the PDF report

All implemented tests are available in the Testing view. imx offers a wide range of standard tests (learn more). Before starting a test, the DUT information must first be entered and a test with suitable test parameters must be selected. The test is then started with one click and the test bench performs the test sequence automatically. Once the measurement data has been recorded, the raw data is evaluated and a PDF report is generated.

The measurement results can also be exported to a third-party format such as Microsoft Excel, Matlab or they can be written directly to a database.


In the control system, first the DUT
information has to be selected. After selecting
the desired test and suitable
test parameter the test can be started.


During the test, the status will be displayed.
Should an error occur, it will be
shown with an error code and description.

Curve window

Display of curve progressions or single values during
the current measurement. In addition, thermometers or
other widgets can be used to display the measured values.


In the Configurator, parameters of the test
of the DUT etc. can be adjusted.


The operation of the test bench and the visualization
of the measurement data is done in the panel (current display).

User management

The software has three user levels that
can be equipped with various rights. Every
User of the software is assigned a corresponding level.


The results of the evaluation are available as a PDF report
and stored in the raw data folder. The evaluation
is done automatically or manually in a separate software.


Via the buttons it is possible to quickly go to the
different panel views.

Parameterization of DUT information and test sequences

In the Configurator view, the DUT-specific information and limit values that are monitored during the test can be customized. The parameters of the test types are divided into those that control the test sequence and those that are used in the evaluation. These can be created and configured independently.

The test plans, which are optionally available as an add-on, enable the cyclic repetition and sequencing of predefined tests. This allows the DUT to be assigned a sequence of tests that the user does not have to start manually, so that the tests can run overnight, over the weekend, or over a longer period of time (endurance tests).

Measurement information

Metadata such as e.g. test item serial number, note

DUT configuration

Definition of DUT limits and properties

Test configuration

Setting parameters for
the test procedure and evaluation


Combining individual tests
to an automated testplan.


Assignment of DUT properties
and test plan or single test to an
EOL-key. This key can be assigned to
a barcode for example.

Test parameter sets

Selection of different
Parameter sets for the test

test parameter set

Create, modify and save
parameters for the selected parameter set

Evaluation parameter sets

Selection of different
Parameter sets for the evaluation

Evaluation parameter set

Create, modify and save
parameters for the selected parameter set

Add-ons for imx OMEGA


Combine single tests into an automated test plan. Within a test plan, repetitions and timeouts can be included so that the test stand can be operated without operator supervision.


Operating the test bench without mouse and keyboard. Loading predefined parameter sets and starting test plans or singele tests can be linked to various events, such as scanning a barcode.

imx GraphiPEd

Edit individual curve shapes comfortably in the graphical editor. This provides a live preview of the sequence in the correct time frame and allows convenient inserting and editing of jumps, ramps etc.

Personal consulting

Scroll to Top